FretIndeXer! Cut all your frets with a consistent fret overhang in just a minute with the holder built right in.
Stick the fret wire into a FretIndeXer tube and cut right at the top. Small to big=nut to heel. The tubes are the exact depth needed to have perfectly cut frets up the entire fretboard with a consistent 2mm on either side remaining for easy nipping. Easy access carve designed into the front of each tube as well for ease of removal.
Need a custom setup for specific fretboard widths with no overlap or a mutiscale option? Check out the Custom FretIndeXer. Design exactly what you need to save you the most time. default specs:
Variant | Nut Width | Fretboard End |
6-string | 43 mm | 57 mm |
7-string | 48 mm | 68 mm |
8-string | 55 mm | 80 mm |
Mandolin | 29 mm | 43 mm at fret 20 |
Ukulele | 35 mm | 47.5 mm at fret 20 |
4-string Bass | 39 mm | 62 mm |
5-string Bass | 46 mm | 70 mm |
24 frets (Mandolin and Ukulele are 20 frets) 2mm overhang on either side of the fretboard Models:
6, 7, 8 string guitars B4 (4 string), B5 (5 string) bass guitars
U (Ukulele)
M (Mandolin)