STL FILE ONLY

———

FretIndeXer™ / SDI — STL Personal Use License

PERSONAL USE ONLY — NO COMMERCIAL PRODUCTION

By purchasing or downloading this STL file, you agree to the following terms:

This digital design is licensed exclusively for personal, non-commercial use. You may 3D print the product for your own use only.

You may NOT:

• Print, manufacture, or produce this design for another person or business, whether for payment or free of charge.

• Sell, distribute, gift, or otherwise transfer physical products made from these files.

• Share, resell, redistribute, or upload the STL files to any website or third party.

• Modify the design for the purpose of circumventing these restrictions.

• Use the design for commercial manufacturing, print-on-demand services, or resale.

All intellectual property rights remain with the original creator, Eric Hill. Purchasing this file grants a limited, non-exclusive, non-transferable personal-use license. No commercial rights are granted.

© 2026. All rights reserved.

Unauthorized use may result in legal action.

———————————————

Print your FretIndeXer B4 at home! STL file only

Details:Cut all your frets with a consistent fret overhang in just a minute with the holder built right in.

Stick the fret wire into a FretIndeXer tube and cut right at the top. Small to big=nut to heel. The tubes are the exact depth needed to have perfectly cut frets up the entire fretboard with a consistent 2mm on either side remaining for easy nipping. Easy access carve designed into the front of each tube as well for ease of removal.

Need a custom setup for specific fretboard widths with no overlap or a multiscale option? Check out the Custom FretIndeXer. Design exactly what you need to save you the most time. default specs:

24 frets (Mandolin and Ukulele are 20 frets)

2mm overhang on either side of the fretboard

For CUSTOM specs, please check out the CUSTOM option in the store.