STL FILE ONLY ———

Side Dot Drilling Guides — STL Personal Use License

PERSONAL USE ONLY — NO COMMERCIAL PRODUCTION

By purchasing or downloading this STL file, you agree to the following terms:

This digital design is licensed exclusively for personal, non-commercial use. You may 3D print the product for your own use only.

You may NOT:

• Print, manufacture, or produce this design for another person or business, whether for payment or free of charge.

• Sell, distribute, gift, or otherwise transfer physical products made from these files.

• Share, resell, redistribute, or upload the STL files to any website or third party.

• Modify the design for the purpose of circumventing these restrictions.

• Use the design for commercial manufacturing, print-on-demand services, or resale.

All intellectual property rights remain with the original creator, Eric Hill. Purchasing this file grants a limited, non-exclusive, non-transferable personal-use license. No commercial rights are granted.

© 2026. All rights reserved.

Unauthorized use may result in legal action. ---------

These side dot drilling guides will give you consistent dot placements in just a few minutes. Mark the top of the fretboard with a vertical line at the center of the fret and then simply place the jig on that line, viewing it through the triangular hole and drill it through the size-specific drill hole. These will place the hole just above the neck/fb glue joint assuming the fretboard is .250" PRE RADIUS. 3 different sizes included. 2mm, 3mm and 4mm. Please note: these are meant to be used BEFORE the fretboard is radiused.